즐겨찾기
 JAI
Camera Link
GigE
Multi-CCD
Analogue
이전 다음
제품명 : RM-2030CL 
MODEL : RM-2030CL
RESOLUTION : 1920(H) x 1080(V)
SENSOR : 1.0
FRAME/LINERATE : 32/16fps
INTERFACE : Camera Link
 
 
• 1” progressive scan IT CCD imager (KAI-2093)
• 1920(H) x 1080(V) pixels (HDTV format)
• 7.4 μm square pixels
• 32 fps in dual-tap mode
• SW selectable single-tap mode @ 16 fps
• 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
• Digital Camera Link output and analog output
• Full-frame shutter to 1/16,000 sec.
• Asynchronous reset, no-delay, pulse width control shutter
• Defective pixel compensation
• PIV (particle imaging velocimetry) mode
• Automatic channel balancing
• GUI or serial commands for external control
• Monochrome or color
TM-2030CL / RM-2030CL 
 
RM-2030GE - KAI-2093 camera, HDTV format 
  • 1” progressive scan IT CCD imager (KAI-2093) with
    7.4 μm square pixels
  • 1920(H) x 1080(V) pixels (HDTV format)
  • 32 fps in dual-tap mode
  • 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
  • Camera Link interface
  • Full-frame shutter to 1/16,000 sec.
  • Defective pixel compensation
  • PIV mode
  • Automatic channel balancing
 
The TM-2030CL is a compact, high-resolution (2 Megapixels) monochrome progressive scan CCD camera with a wide-screen field of view (FOV) of 1920 x 1080 pixels. The camera features a dual-tap front-end, automatic channel balancing, Camera Link digital output, and a frame rate of 32 fps at full resolution. A single-tap mode at 16 fps is user selectable. The TM-2030CL features the Kodak KAI-2093 1" CCD imager for high image quality and sensitivity.

The TM-2030CL delivers an outstanding signal-to-noise ratio of >57 dB in typical operation. A high performance front-end provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). The camera has a flexible programmable shutter capable of speeds from 1/32 to 1/16,000 second in one-line increments of 27.5 µs. Other advanced features include defective pixel compensation, and a PIV mode.

Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of a few frames in between.

Some of the functions that can be controlled by this interface are: manual, async and pulse-width control shuttering; save, load and report settings; and channel auto balancing.
A GigE Vision version of this camera is also available. Click here for more information.
Dimensions (H x W x L): 51 x 51 x 74 mm
○ 해당 관련 파일 1 : Datasheet_TM-TMC-2030CL_revB_0.pdf  ( KB)
○ 해당 관련 파일 2 : Manual_TM-2030CL_0.pdf  ( KB)