즐겨찾기
 JAI
Camera Link
GigE
Multi-CCD
Analogue
이전 다음
제품명 : RM-4200CL 
MODEL : RM-4200CL
RESOLUTION : 2048(H) x 2048(V)
SENSOR : 1.2
FRAME/LINERATE : 15fps
INTERFACE : Camera Link
 
 
• 1.2” progressive scan IT CCD (Kodak KAI-4021)
• 2048 x 2048 resolution @ 15 fps dual-tap
• 7.4 μm square pixels
• Software-selectable single-tap mode available @ 8 fps
• 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
• Digital Camera Link output and analog output
• Image center partial scan (1000, 500, 250 lines)
• 2X2 binning and user-programmable variable partial scan
• Full-frame shutter to 1/16,000 sec.
• Asynchronous reset, no-delay, pulse width control shutter
• Defective pixel compensation
• PIV (particle imaging velocimetry) mode
• Automatic channel balancing
• Monochrome or color
RM-4200CL 
 
RM-4200CL - KAI-4021 camera, 4 megapixel camera 
  • 1.2” progressive scan IT CCD imager (KAI-4021)
  • 2048 x 2048 resolution @ 15 fps, 7.4 μm square pixels
  • 12-bit linear output, or 8-bit/10-bit with LUT
  • Camera Link interface
  • Image center preset and user-definable partial scan modes
  • Full-frame shutter to 1/16,000 sec.
  • Defective pixel compensation
  • PIV mode
 
The RM-4200CL is a compact, very high-resolution (4.2 Megapixels) monochrome progressive scan CCD camera with dual-tap output, automatic channel balancing, and a frame rate of 15 fps at 2048 x 2048 resolution. A single-tap output mode is user selectable. The RM-4200CL features the latest Kodak KAI-4021 CCD imager for the best image quality and sensitivity.

The RM-4200CL provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). Other features include image center partial scanning (250, 500, or 1000 lines), user-definable variable partial scanning (any number of lines with any starting point), flexible 2X binning (horizontal, vertical, or both), defective pixel compensation, and a PIV mode.

Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of a few frames in between.

Some of the functions that can be controlled by this interface are: manual, async and pulse-width control shuttering; save, load and report settings; and channel auto balancing.
A GigE Vision version of this camera is also available. Click here for more information.
Dimensions (H x W x L): 51 x 51 x 74 mm
○ 해당 관련 파일 1 : Datasheet_TM-TMC-4200CL_screen_1.pdf  ( KB)
○ 해당 관련 파일 2 : Manual_TM-4200CL-revD_1.pdf  ( KB)